B6250 User’s Guide> 74
Network Menu
The Network Menu provides access to the printer network settings.
Use the following procedure to enter the network menu:
1. Press the MENU button on the control panel.
2. Press the < > button until the text “Network Menu” is
shown on the first line of the display.
3. Press the < > button to enter the Network menu.
4. Press the <> or <> buttons to move through the
submenus.
5. Press the < > button to enter the submenu.
Use the procedures in the following table to access and change the
Network Menu settings:
Submenus Default
Setting
Available
Settings
Procedure for
Changing Setting
TCP/IP Enabled Enabled
Disabled
Press < > or < >
buttons to toggle between
Enable and Disable.
Press <SELECT> to save the
selection.
Ethertalk Enabled Enabled
Disabled
Press < > or < >
buttons to toggle between
Enable and Disable.
Press <SELECT> to save the
selection.
IP Address Set Automatic Automatic
Manual
Press < > or < >
buttons to toggle between
Automatic and Manual.
Press <SELECT> to save the
selection.
To Next Page
Loading...
Need help?
General
