B6250 User’s Guide> 69
Parallel Menu
The Parallel Menu provides access to the Parallel settings. Use the
following procedure to enter the parallel menu:
1. Press the MENU button on the control panel.
2. Press the < > button until the text “Parallel Menu” is
shown on the second line of the display.
3. Press the < > button to enter the parallel menu.
4. Press the
<> or <> buttons to move through the
submenus.
5. Press the < > button to enter the submenu.
Use the procedures in the following table to access and change the
Parallel Menu settings:
Submenus Default
Setting
Available
Settings
Procedure for
Changing Setting
Parallel
This submenu
allows you to
set up the
parallel
interface.
Enable Enable
Disable
Press < > or < >
buttons to toggle between
Enable and Disable.
Press <SELECT> to save the
selection.
Bi-Direction
Enable
bidirectional
communication
with the PC.
Enable Enable
Disable
Press < > or < >
buttons to toggle between
Enable and Disable.
Press <SELECT> to save the
selection.
PS Protocol ASCII ASCII
RAW
Press < > or < >
buttons to toggle between
EASCII and RAW.
Press <SELECT> to save the
selection.
To Next Page
Loading...
Need help?
General
