Getting Started > 11
R
EAR
VIEW
When the rear paper stacker is folded down paper exits the printer through the rear of the
printer and is stacked here face up. This is mainly used for heavy print media. When used
in conjunction with the multi purpose feed tray, the paper path through the printer is
essentially straight. This avoids bending the paper around curves in the paper path and
enables feeding of up to 220g/m² media.
C
HANGING
THE
DISPLAY
LANGUAGE
The default language used by your machine for display messages is English. If required,
this can be changed using the Panel Language Set-up utility.
S
WITCHING
ON
1. Plug the power cable into the power socket of your machine.
2. Plug the power cable into the electric socket.
3. Press the power switch ON.Switching off
S
WITCHING
OFF
Hold down the power switch for approximately one second.
E
NERGY
SAVING
SETTINGS
P
OWER
SAVING
MODE
If you do not use the machine for a while, it will enter the power saving mode to control
the power consumption of the device. To cancel or initiate power saving mode, press the
1. AC power socket.
2. Rear, face up stacker.
3. USB interface.
4. SD card slot (C531/ES5431
only).
5. Network interface.
a
a. The Network Interface may have a protective “plug” which
must be removed before connection can be made.
NOTE
A message displays on the LCD screen and power switch indicator blinks, then
the printer switches OFF automatically.
1
2
5
4
3
To Next Page
Loading...
Need help?
General
