- 162 -
9. Troubleshooting
1
Open the ADF cover (a).
2
Remove the jammed document. Proceed to step 4 if you cannot remove the
jammed document.
Do not try to remove the document by force.
3
If you were able to remove the document, proceed to step 8.
4
Open the inner cover (b).
5
If you can see the edge of the jammed document, pull it out gently.
6
If the edge of document jammed under the document tray (c) can be seen, lift
up the document tray and gently pull out the document to remove.
If a Document Jams in the ADF (Automatic Document Feeder)
To Next Page
Loading...
Need help?
General
