Network User’s Guide
41
Option Menu
Explanation of Option Menu Items
Item Explanation
Use TCP/IP
Protocol
If this item is selected, AdminManager uses TCP/IP
protocol to search/configure network interfaces.
Use IPX/SPX
Protocol
If this item is selected, AdminManager uses IPX/
SPX protocol to search/configure network
interfaces.
Environment
Setup
TCP/IP Tab
Set broadcast addresses that
are used to search printers
using the TCP/IP protocol. If
Use TCP/IP protocol is
unchecked, the search will not
be carried out using TCP/IP.
NetWare Tab
Set network addresses that are
used to search printers via
NetWare protocol. If there any
many NetWare file servers on
your network, specify the
network address to which the
network interface belongs. If
Use NetWare protocol is unchecked, the search
will not be carried out using NetWare, but if Auto
Search is selected, AdminManager will search all
networks that AdminManager can detect.
SNMP Tab
Obtain the printer name via
SNMP - Select
Enter Community name.
Add and Delete