Network User’s Guide
59
Network Printer IP Address
Configuration_____________________
Use the Standard Set-up Utility on the CD supplied with your
unit to configure the IP Address, Subnet Mask and Gateway.
1. Connect the printer to the network and turn it on.
2. Insert the CD into the CD-ROM drive. The Setup Utility
starts automatically. If it does not start, double-click
\setup.exe (in the root directory) on the CD.
3. Select the appropriate language and follow the on-screen
instructions.
4. Accept the Software License Agreement.
5. Select the Optional Utilities tab.
6. Then select Install Admin Manager.
NOTES
It will not be necessary for printers connected
to a network using DCHP to use this setup
method.
Some steps may not display depending on the
network protocols installed.
To Next Page
Loading...
Need help?
General
