Network User’s Guide
62
Windows XP
Although you can install the NetBEUI protocol into Windows
XP, it may not be supported. You should be able to use
NetBEUI on LAN connections although you will not be able to
use this on a Remote Access Service Connections.
1. In the Start menu, select Settings then Control Panel.
2. Double-click on Network Connections.
3. Right-click the adapter to which you wish to add NetBEUI
and then click Properties.
4. On the General tab, select Install.
5. Select Protocol and then Add.
6. Select Have Disk and insert your Windows XP CD, open
the Valueadd\msft\net\netbeui folder, select the
Netnbf.inf file and then click Open.
Now the printer has been configured and NetBEUI has been
installed, you can configure Windows to print over the
network.
Windows Vista
NetBEUI is not supported by Windows Vista.
To Next Page
Loading...
Need help?
General
