Printing from Trays
AppendixSetting Up
2
Before Use
1
Printing
3
Basic Device Operations
4
Index
- 86 -
Printing from Trays
With the exception of some paper sizes, the printer automatically detects the size of paper set in trays
1 to 5
*
. Further, only the width of the paper size is automatically detected.
*: Trays 2 to 5 are optional.
Memo
The printer does not automatically detect the following paper sizes.
- A3NOBI, tabloid extra, A3WIDE, 13×18"
-A5, A6
-postcards, Japanese double postcards
-legal13.5, legal14
-custom
If the printer does not detect automatically, use the control panel to set the paper size. For details, see “Setting Paper Using
the Control Panel” (P.91).
Set 13x18" as custom size.
Setting Paper in Trays 1 to 5
This section explains how to set paper in tray 1
or trays 2/3/4/5.
Memo
In this section, setting paper in tray 1 is used as an
example. Set trays 2 to 5 using the same procedure.
1
Pull out the tray 1 paper cassette ( ).
2
Slide the paper guide ( ) and paper
stopper ( ) to align to the size of the
paper that has been set.
3
Thoroughly sort the paper. Carefully
align the ends of the paper horizontally.
To Next Page
Loading...
Need help?
General
