Oki C9650dn Network And Configuration Guide

Overview > 63
O VERVIEW
This guide is for administrators and it should be read in
conjunction with the relevant MacOS manual.
To get the best results from your printer, install the Postscript
Printer Description (PPD) file supplied with your printer and use
this to customize the Apple PostScript driver that is built-in to the
OS X. Features provided by the PPD file includes:
> Supported paper types
> Paper trays
> Printer resolution
> Printer color matching
S ETTING UP A NETWORK PRINTER
1. If the printer does not already have an IP address, use the
Printer Setup Utility to assign an IP address. See “The
printer setup utility interface” on page 66.
To do this, you will need to know the printer's MAC
address. This can be found on the print server's network
summary printout. See “Network summary printout” on
page 64.
2. Install the printer driver software. This copies the printer
driver files to the correct location on your Mac OS X
system.
3. Make a connection to the printer by USB, TCP/IP,
Rendezvous or AppleTalk. See “Connecting to your
printer” on page 76.
4. If required, enable hardware device options such as
duplex unit or printer hard disk. See “Configuring printer
hardware options” on page 82.
NOTE
The PPD file must be installed using the Oki Driver Installer to
ensure that all essential files are copied.

Oki C9650dn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	85 sec
resolution	1200 x 600 dpi

Memory

standard RAM	512 MB
maximum RAM	1, 024 MB
flash memory	4 MB
hard disk drive	40 GB

Power

power consumption operating typical	780W
power consumption peak	<1500W
power consumption standby	200W
power consumption power save	33W

Weight and Dimensions

size	23.6" x 24.6" x 18.5"
weight	167.5 lb
weight with consumables	76.0 kg