Oki C9650dn Network And Configuration Guide

Introduction > 7
I NTRODUCTION
The OkiLAN Internal Print Server is a fast 10BASE-T/
100BASE-TX/1000Base-T network interface.
This network print server supports IEEE 802.2, IEEE 802.3,
Ethernet-II and SNAP, and can detect those frame types
automatically.
It supports major protocols such as TCP/IP, EtherTalk (Mac) and
NetBEUI (Windows).
The print server has a number of security features, including
SSL/TLS, IP Filtering, disabling unused protocols, etc.
Password protection ensures that the print server is safe from
unauthorized changes in settings. You can also restrict access by
disabling network services, protocols, and ports you are not
using. You can limit access to specific authorized IP addresses as
well.
The SMTP feature allows you to have an E-mail sent to
designated addresses when certain errors occur.
NOTE
The network addresses used in this manual are shown for
example only. Network addresses used in your installation
should be within in the appropriate address range and have
the correct subnet mask for your network segment.
NOTE
Change the emulation in the Printer Menu settings to Auto or
PS before printing the network summary.

Oki C9650dn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	85 sec
resolution	1200 x 600 dpi

Memory

standard RAM	512 MB
maximum RAM	1, 024 MB
flash memory	4 MB
hard disk drive	40 GB

Power

power consumption operating typical	780W
power consumption peak	<1500W
power consumption standby	200W
power consumption power save	33W

Weight and Dimensions

size	23.6" x 24.6" x 18.5"
weight	167.5 lb
weight with consumables	76.0 kg