Maintenance > 116
C
LEANING
From time to time print “debris” such as ink, toner and paper dust will accumulate in the
ADF and the document glass from documents which have been copied.
...
THE
UNIT
CASING
1. Switch off the MFP.
2. Wipe the unit surface with a soft cloth moistened sparingly with water or neutral
detergent.
3. Use a soft dry cloth to dry the unit surface.
4. Turn on the MFP.
...
THE
PAPER
PATH
IN
THE
ADF
If marks are found on an image, which has been read by the ADF, or the ADF does not feed
documents smoothly, follow the cleaning procedure below.
1. Switch the MFP OFF.
2. Open the ADF top cover.
3. Pinch the ADF lock lever and swing the feeder mechanism up until it is locked.
CAUTION!
Use a clean, moist, lint-free cloth for cleaning. Do not use benzine,
thinners or alcohol as a cleaning agent.
To Next Page
Loading...
Need help?
General
