Faxing(MB470/MB480) > 69
4. If required, press the Up arrow key and scroll to Check Dest. to view /edit the list
of fax numbers:
> Press Enter to remove any entry from the list (no longer displays * next to the
entry).
> Press the Left arrow key to exit the list.
5. Press the Start button to send your document(s).
A
DVANCED
OPERATION
Changing the Fax Quality (Mode)
The machine is preset to “Standard”. If required, you can select Fine, ExtraFine, or Photo
to improve fax quality.
To change fax quality:
1. Follow “Sending a Fax” process steps 1 to 4.
2. Using the Down arrow key, scroll to Standard and press Enter.
3. Using the Down arrow key, scroll to the required quality setting and press Enter.
4. Press the Start button to send your document(s).
Adjusting Density
The machine is preset to the “Normal” level of Density. If your original document comes
with a lighter or darker contrast, you can improve the quality by adjusting the density
setting.
To change density:
1. Follow “Sending a Fax” process steps 1 to 4.
2. Using the Down arrow key, scroll to Density:0 and press Enter.
3. Using the Down arrow key, scroll to the required density setting and press Enter.
4. Press the Start button to send your document(s).
Document Size
The machine is preset to “A4” size.
To change the document size:
1. Follow “Sending a Fax” process steps 1 to 4.
2. Using the Down arrow key, scroll to A4 and press Enter.
NOTE
If you wish to cancel faxing, press Stop to abort the operation.
Fax transmissions are sent in black and white only.
NOTE
After you have completed your fax operation, the machine will automatically
return to the preset value.
NOTE
After you have completed your fax operation, the machine will automatically
return to the preset value.
To Next Page
Loading...
Need help?
General
