Functions common to copy, fax and scan operations > 109
F
UNCTIONS
COMMON
TO
COPY
,
FAX
AND
SCAN
OPERATIONS
C
ONTINUOUS
SCAN
MODE
If you need to scan, copy or fax multiple sets of documents from the ADF or document
glass, enable the “Continuous Scan” option.
To set the fax to continuous scan:
1. Place your document(s) with text face UP in the ADF or face DOWN on the glass.
2. Press the Fax button on the control panel to prompt the Fax Ready screen.
3. Ensure Fax is highlighted, then press OK.
4. Using the Down arrow key, scroll to Fax Functions and press OK.
5. Using the Down arrow key, scroll to Continuous Scan(ADF) or Continuous
Scan(Document Glass) and press OK.
6. Select ON and press OK.
7. Press the BACK button to exit the menu and return to the Fax Ready screen.
8. Set your send properties as required.
9. Press Mono to start scanning the first document.
Once the current scanning operation is complete, the screen will display “Please set next
document”. If you have further documents to scan, ensure Start Scan is highlighted then
press OK to continue scanning or use the Down arrow key to select Scan Complete.
NOTE
The example below uses the fax feature, however, the scan and copy features
follow the same process.
To Next Page
Loading...
Need help?
General
