To Next Page

To Previous Page

- 92 -

Scanning to Computer

Scanning

3 Plug one end of the Ethernet cable into

the network interface connection on the

back of the machine.

4 Plug the other end of the Ethernet cable

into the hub.

5 Hold down the power switch for

approximately one second to turn on the

power.

 Connecting using wireless LAN

(MC342dw, MC362w, MC562w, MC562dw,

ES5462dw MFP, MPS2731mc only)

Use the WPS (push button) function to set the

wireless LAN. For details on other methods

for setting the wireless LAN, refer to the

Conguration Guide.

1 Press the <SETTING> key on the operator

panel.

2 Press the to select [Wireless Setting],

and then press the

3 Log in by entering administrator password

of the device.

Use , , , key to select letter and then

press

Default administrator password is “aaaaaa”.

The message below will be displayed for

about 5 seconds.

4 Check that [Automatic setup (WPS)]

is selected, and then press the

5 Press the to select [WPS-PBC], and

then press

Oki MC562w Startup Guide

Other manuals for Oki MC562w