Oki ML1120 User Manual

ML1120/ML1190 eco User’s Guide – Operating instructions > 80
P RINTER SPEED SETTINGS
P RINTER IMPACT MODE
When switched ON, the printer enters the impact mode selected
in the menu. You can change this to normal speed, high speed
and quiet printing without using the menus as follows.
(This function is enable for ML1120 eco.)
N ORMAL SPEED PRINTING
Use this for standard file printing operations.
1. Ensure the SEL indicator is illuminated.
2. Hold down the SEL button and press the TEAR button.
Status Indicator 1 turns OFF and Status Indicator 2 illuminates.
H IGH SPEED PRINTING
Use this for high speed printing.
1. Ensure the SEL indicator is illuminated.
2. Hold down the SEL button and press the TEAR button.
Status Indicator 1 illuminates and Status Indicator 2 turns OFF.
(High speed printing is applied only to the print of NLQ.)
Q UIET PRINTING
Use this for quieter printing.
1. Ensure the SEL indicator is illuminated.
2. Hold down the SEL button and press the TEAR button.
Status Indicator 1 and Status Indicator 2 illuminate.

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \