To Next Page

To Previous Page

7 ASSEMBLY

— See this section for the replacement of the light bulb. —

BX51

CONTENTS

4-5

6-7

8-20

TRANSMITTED LIGHT BRIGHTFIELD OBSERVATION PROCEDURE

3-2 Focusing Block ...................................................................................................................................................................................... 11

1 Voltage Indication 2 Using the Light Intensity Preset Switch

3 Using the Filters

21-23

24-25

26-27

28-30

Correct assembly and adjustments are critical for the microscope to exhibit its full performance. If you are going to assemble

the microscope yourself, please read section 7, “ASSEMBLY” (pages 28 to 30) carefully.

IMPORTANT — Be sure to read this section for safe use of the equipment. —

1 NOMENCLATURE

3 USING THE CONTROLS

3-1 Base ................................................................................................................................................................................................................. 8-10

3-3 Stage............................................................................................................................................................................................................ 12 - 14

3-4 Observation Tube ...................................................................................................................................................................... 15-17

3-5 Condenser .......................................................................................................................................................................................... 18-19

1 Centering the Condenser

2 Compatibility of Objectives and Condensers

3-6 Immersion Objectives ................................................................................................................................................................. 20

1 Using Immersion Objectives

3-7 Objectives with Correction Collar ............................................................................................................................. 20

4 TROUBLESHOOTING GUIDE

5 SPECIFICATIONS

6 OPTICAL CHARACTERISTICS

(UIS2/UIS Series)

PROPER SELECTION OF THE POWER SUPPLY CORD ..................................................................

31-32

1 Replacing the Fine Adjustment Knob

2 Adjusting the Coarse Adjustment Knob Tension 3 Pre-focusing Lever

1 Placing the Specimen 2 Adjusting the X- and Y-Axis Knob Tension

3 Rotating the Stage 4 Adjusting the Stage Height

1 Adjusting the Interpupillar Distance

2 Adjusting the Diopter