3
These instructions are for the Olympus C-2000
digital stills camera.
Basic Operation
Switch on
1. TAKE OFF THE LENS CAP!!!! This must be done before
switching on the camera. DAMAGE WILL OCCUR IF THE
LENS CAP IS NOT REMOVED WHEN THE CAMERA IS
SWITCHED ON.
2. Switch on the camera by pressing the “power” button.
3. The lens will extend and the camera is now ready for use.
Shooting Modes
There are 3 different shooting modes, they are
Programmed (P), Aperture Priority (A) and
Shutter Priority (S). The mode is selected by
moving the ring of the mode dial to indicate the
required shooting mode. For general use, set the
camera to (P). This means that the camera will try to work out
everything for you. All you have to do is compose and shoot!.