5
After the picture has been taken, it is saved in the camera’s
memory. It is also displayed on the LCD for a few seconds as a
confidence check. The memory can hold about 15 shots, dependent
on picture content. The LCD on top of the camera displays the
number of frames remaining.
Viewing Your Pictures
You can view your pictures on the LCD
1.Switch to viewing mode. The LCD will
switch on itself.
2. Navigate through your pictures using the “left” and “right”
arrows on the jog dial. Note that “up” and “down”
arrows take you to the end and beginning of your
set respectively .
3. You can zoom in to your picture
by pressing the zoom lever
towards “T”. Once zoomed in you
can then navigate around the
picture using the jog dial.
4. If you press the zoom lever
towards “W” you will return to
normal. If you press “W” again you will get all your pictures
displayed on the LCD.
To Next Page
Loading...
Need help?
General
