DP70 - System Chart
4
DP70 - System Chart
The DP70 system chart belongs to the camera's scope of supply. Please go in the
DP70 user's manual to Chapter 1: (The System Chart).
The installation process
You have
purchased the
image analysis
program and
camera together
If you have purchased the DP70 camera together with the image analysis program,
you will need to carry out both the hardware installation for the camera and the soft-
ware installation for the image analysis program.
In order to avoid problems, you will have to follow the steps of the procedure in the
order given here.
Install the PCI board.
This step is described in the DP70 user's manual (Chapter 2: Hardware Instal-
lation, page 8).
Install the camera on your microscope.
This step is described in the DP70 user's manual (Chapter 2: Hardware Instal-
lation, page 9).
Connect the camera to your PC with the cable that was supplied with it.
This step is described in the DP70 user's manual (Chapter 2: Hardware Instal-
lation, page 10).
Prepare your computer for the rest of the installation.
This step is described in this manual, beginning on page 6.
Start the DP2-BSW image analysis program.
Install the DP2-BSW image analysis program.
This step is described in this manual, beginning on page 8.
To Next Page
Loading...
Need help?
General
