Installation of the DP70 camera with the DP2-BSW software
6
Installation of the DP70 camera with
the DP2-BSW software
System requirements
See the DP70 Instructions Manual, page 4, for the system requirements.
Preparing your computer
You can also install the DP2-BSW software on your PC when you have already
installed another software package from Olympus Soft Imaging Solutions on it.
Only if the camera
has not been
installed previously
1) Switch on the PC and start the operating system.
" You need administrator rights in order to install the software.
" The Found New Hardware dialog box will open. The operating system has
detected the new PCI board.
After starting the
computer this dialog box
will be opened.
Only if the camera
has not been
installed previously
2) Click the Cancel button to abort the installation.
" The Found New Hardware dialog box will be closed. The correct drviers will
be installed in conjunction with the image analysis psystem.
3) Insert the software protection key (dongle) into a USB port of your PC.
To Next Page
Loading...
Need help?
General
