107
EN
9
Customizing your camera
n FUNCTION:
When selecting P, you can use the arrow pad to select the position of the AF target. You
can perform this operation for several seconds after pressing the shutter button halfway and
then releasing it.
x Notes
• During live view, the n button operation is exclusive to the movie button regardless of the
setting.
• The same function cannot be assigned to multiple buttons.
• The functions that cannot be assigned are not displayed on the function selection screen.
BUTTON TIMER
The direct button may remain selected even after it is released.
[OFF] Available only when the button is pressed.
[3SEC]/[5SEC]/[8SEC] The button remains selected during the number of seconds
indicated.
[HOLD] The button remains selected until you press it again.
• Buttons that can be set with [BUTTON TIMER]
ISO, F, WB, #, w, G, AF, </Y/j, MODE
A
You can switch the functions of the AEL/AFL button and the < button. When you select
[ON], the AEL/AFL button will function as the < button, and the < button will function as
the AEL/AFL button.
• The setting also applies to the < button on the optional power battery holder when
attached to the camera.
Function Detail
Button to assign
< P
(preview)
[Y/X]
(Underwater wide/
Underwater macro)
You can switch the shooting mode to [Y/X] by
pressing the button.
Press and hold the button to return to the previous
shooting mode.
9 kk
[LEVEL GAUGE]
Press the button to display the level gauge in the
viewfinder and on the control panel, and press it
again to hide the level gauge display.
g“LEVEL GAUGE” (P. 110)
99 9
[MAGNIFY]
Press the button to display the subject enlarged on
the monitor.
9 k 9
[AF AREA
SELECT]
You can select the AF target by rotating the dial
while holding down the button.
99 9
[IS MODE (I.S.)]
You can set the image stabilizer by rotating the dial
while holding down the button.
g“Image stabilizer” (P. 62)
99 9
[OFF] Does not allow function allocation.
99 9
9 :Available to assign k :Cannot assign
s0033_e_00_0_unified.book 107 ページ ２０１０年１１月１６日 火曜日 午後５時２４分
To Next Page
Loading...
Need help?
General
