Olympus E-M10 Mark IV User Manual

Menu functions (Shooting menu)
4
122 EN
Shooting automatically with a xed interval (Intrvl. Sh./Time Lapse)
You can set the camera to shoot automatically with a set time lapse. The shot frames
can also be recorded as into a single movie. This setting is only available in P/A/S/M
modes.
1
Highlight [Intrvl. Sh./Time Lapse] in X Shooting
Menu 2 and press I.
2
1
Shooting Menu 2
K
Elec. Zoom Speed
±0.0
Normal
S-IS On
K
Image Stabilizer
Intrvl. Sh./Time Lapse Off
Back Set
#RC Mode Off
Silent [♥] Settings
Multiple Exposure Off
2
2
Select [On] and press the I.
3
Adjust the following settings and press the Q button.
Number of Frames Sets the number of frames to be shot.
Start Waiting Time Sets waiting time before starting to shoot.
Interval Length Sets interval between shots after shooting starts.
Time Lapse Movie
Sets recording format of frame sequence.
[Off]: Records each frame as a still picture.
[On]: Records each frame as a still picture and generates a single
movie from the frame sequence.
Movie Settings
[Movie Resolution]: Choose a size for time lapse movies.
[Frame Rate]: Choose a frame rate for time lapse movies.
• The starting and ending times shown in the display are intended as a guide only. The
actual times may vary with shooting conditions.
4
The [Off]/[On] options will be displayed once more; conrm that [On] is
highlighted and press the Q button again.
5
Shoot.

Olympus E-M10 Mark IV Specifications

General

Brand	Olympus
Model	E-M10 Mark IV
Category	Digital Camera
Language	English