Menu functions (Custom menus)
4
141
EN
Using the TV remote control
The camera can be operated by a TV remote control when connected to a TV that
supports HDMI control. Select [On] for [HDMI Control]. When [On] is selected,
camera controls can be used for playback only.
• You can operate the camera by following the operation guide displayed on the TV.
• During single-frame playback, you can display or hide the information display by
pressing the “Red” button, and display or hide the index display by pressing the
“Green” button.
• Some televisions may not support all features.
Shutter speeds when the ash res (#X-Sync./#Slow Limit)
MENU G b [# X-Sync.]/[# Slow Limit]
You can set shutter speed conditions for when the ash res.
Shooting mode Flash ring shutter speed Upper limit Lower limit
P
The camera automatically sets the
shutter speed.
[# X-Sync.]
setting*
1
[# Slow Limit]
setting*
2
A
S
The set shutter speed No lower limit
M
*1 1/200 seconds when using a separately sold external ash.
*2 Extends up to 60 seconds when slow synchronization is set.
Combinations of JPEG image sizes and compression rates
(K Set)
MENU G W [K Set]
You can set the JPEG image quality by combining image size and compression rate.
Image size Compression rate
Name Pixel Count
SF
(Super Fine)
F
(Fine)
N
(Normal)
Y(Large)
5184×3888
YSF
Y
F
Y
N
X
(Middle)
3200×2400
XSF XF
X
N
W
(Small)
1280×960
WSF WF
W
N