Olympus MACRO FLASH SYSTEM User Manual

48 49
OPTIONAL ACCESSORIES
Shoe adapter ring
• Flash Adapter Ring FR-1
Mounting adapter for use with a Zuiko Digital
ED50mmf2.0Macro lens for Olympus Four Thirds System
digital cameras.
External power supplies
• Flash High Voltage Set SHV-1
(Includes the HV-1 High Voltage Pack, BN-1 Ni-Mh Bat-
tery Pack and AC-2 AC Adapter.)
The included BN-1 Ni-Mh battery pack makes it possible
to charge the flash faster and increase the available flash
emission count.
Batteries used in FC-1 Battery used in HV-1 Flash interval Flash count
AA (R6) alkaline batteries
BN-1 Approx. 1 sec. Approx. 750 times
None Approx. 1.2 sec. Approx. 420 times
• Flash emission interval and count data obtained from in-house tests at Olympus.
Note
Up to 40 successive full flashes are permitted. To allow the light-emitting surface to cool, the flash should not be
used for at least 10 minutes after 10 flashes have been fired. See page 48 for details.
CONTINUOUS FIRING
Continuous firing makes the light-emitting section hot and may cause it to deteriorate or malfunc-
tion. Therefore, continuous firing should be limited to the counts shown in the following tables. Do
not use the Macro Flash System for at least 10 minutes after continuous firing up to the limit count.
Limit counts of continuous firings
Limit count
Ring Flash RF-11 40 times
Limit count
Twin Flash TF-22 40 times

Olympus MACRO FLASH SYSTEM Specifications

General

Brand	Olympus
Model	MACRO FLASH SYSTEM
Category	Camera Flash
Language	English