Olympus OEP-5 User Manual

Inspection Before Use
3
3.2 Setup of this Instrument
35
3.2 Setup of this
Instrument
This section explains the items to be confirmed and
other setup items required to use the instruments other
than the devices described in “INSTRUCTIONS
(BASIC).”
For detailed information on other setup items, see
“Chapter 5 System Setup” on page 46.
Figure 3.1
1 Press the “MENU” button.
2 Depending on the connected equipment, perform
setup of the color video printer (OEP-5) by
following the procedures below.
Ta bl e 3 .2
Connected
Instrument
Procedure
CV-160 1 Press “v” or “V” until the LCD
panel shows “SIGNAL SETUP,”
and press the “ENTER” button.
2 When “INPUT SETUP” appears,
press “v” or “V” to display
“INPUT SEL,” and press the
“ENTER” button.
3 Press “v” or “V” until
“COMPONENT” appears below
“INPUT SEL,” and press the
“ENTER” button.
Cursor keys
“ v ” “ V ” “ b ” “ B ”
LCD panel LOAD USER button
MENU button
ENTER button
OTV-S7Pro 1 Press “v” or “V” until the LCD
panel shows “SIGNAL SETUP,”
and press the “ENTER” button.
2 When “INPUT SETUP” appears,
press “v” or “V” to display
“INPUT SEL,” and press the
“ENTER” button.
3 Press “v” or “V” until
“COMPONENT” appears below
“INPUT SEL,” and press the
“ENTER” button.
4 Press the “MENU” button. And
then press “v” or “V” until the
LCD panel shows “SIGNAL
SETUP,” and press the “ENTER”
button.
5 When “INPUT SETUP” appears,
press “v” or “V” to display “SD/
HD SEL,” and press the “ENTER”
button.
6 Press “v” or “V” until “AUTO”
appears below “SD/HD SEL,” and
press the “ENTER” button.
OTV-S7V 1 Press “v” or “V” until the LCD
display shows “SIGNAL SETUP,”
and press the “ENTER” button.
2 When “INPUT SETUP” appears,
press “v” or “V” to display
“INPUT SEL,” and press the
“ENTER” button.
3 Press “v” or “V” until the format
of the video signal being input
appears below “INPUT SEL,” press
the “ENTER” button.
VIDEO : Input the signal in
composite signal formats.
S-VIDEO : Inputs the signal in
Y/C signal format.
COMPONET : Inputs the signal in
the component signal format.
OTV-SI
EU-M30S
UCES-2
1 Press “v” or “V” until the LCD
panel shows “SIGNAL SETUP,”
and press the “ENTER” button.
2 When “INPUT SETUP” appears,
press “v” or “V” to display
“INPUT SEL,” and the “ENTER”
button.
3 Press “v” or “V” until “S-VIDEO”
appears below “INPUT SEL,” and
press the “ENTER” button.
EU-ME1 1 Press “v” or “V” until the LCD
panel shows “SIGNAL SETUP,”
and press the “ENTER” button.
2 When “INPUT SETUP” appears,
press “v” or “V” to display
“INPUT SEL,” and press the
“ENTER” button.
3 Press “v” or “V” until
“COMPONENT” appears below
“INPUT SEL,” and press the
“ENTER” button.
Ta b l e 3 . 2
Connected
Instrument
Procedure

Olympus OEP-5 Specifications

General

Brand	Olympus
Model	OEP-5
Category	Medical Equipment
Language	English