Using the flash
The flash functions can be selected to best match the
shooting conditions.
Select the flash option in the function menu.
....................Liiii_ii]y¸¸¸
V
Changing the shooting information
display
The display of the screen information can be changed to
best match the situation, for example, the need for e clear
view of the screen or for making a precise composition by
using the grid display.
Press A (INFO).
• The displayed shooting information changes in
the order shown below each time the button is
pressed. "Shooting mode display" (p. 4)
Normal
2 Use <]D to select the setting option, and
press the _ button to set.
The flash fires automatically in low-
..................................light or backlight conditions.
Pre-flashes are emitted to reduce
Redeye the occurrence of red eye in your
)hotos.
Fill In The flash fires regardless of the
available light.
Flash Off The flash does not fire.
EN
No information
Detailed
Reading a histogram
if the peak fills too much ofthe frame, the
imagewi, appear mostly white
If the peak fills too much
of the frame, the image
will appear mostly blackm
The green section shows
luminance distribution within
the screen's center
To Next Page
Loading...
Need help?
General
