74
EN
Connecting the camera to a computer
Connecting the camera
Smaller terminal
USB port
Multi-connector
USB cable
If nothing is displayed on the camera screen even after connecting the
camera to the computer, the battery may be exhausted. Use a full-charged
battery.
If the camera cannot connect to PC, disconnect the USB cable and check the
setting of [USB Connection] (P. 58) before connecting to PC again.
• The battery can be charged while the camera is connected to the computer
via USB. The charging time varies depending on the performance of the
computer. (There may be cases in which it takes approx. 10 hours.)
To Next Page
Loading...
Need help?
General
