Omnia ONE User Manual

140
Livewire
Configuration of the Omnia.ONE’s Livewire port is accomplished in the Livewire menu. Click on the “Livewire”
link option from the top menu or “Livewire Configuration” form the Main Menu.
The following screen will appear:
In the “Output from Omnia.ONE” section, the output Livewire stream can be named, the Livewire channel to be
used is assigned and the Livewire output stream mode is selected. The Livewire output can also be disabled here.
In the “Input to Omnia.ONE” section, the channel from your Livewire system to be input to the Omnia.ONE is
selected. The Mode: dropdown box should normally be left at the default setting: “From source”.
Full explanation of the Livewire terminology used here is beyond the scope of this manual.
Please refer to your Axia Livewire system documentation for full information.

Omnia ONE Specifications

General

Brand	Omnia
Model	ONE
Category	Computer Hardware
Language	English