Omron 1S Series Practices Guide

26
7-3 Merging NJ/NX Projects
This section describes the procedure to merge the NJ/NX projects.
7-3-1 Referring to a Library File
The NJ/NX project in the sample project file employs the Easy Tuning Library. To use the
Easy Tuning Library in the user project after merging, open the Library Reference Dialog
Box from the user project and read the following library file.
 Library file: OmronLib_EC_1S_EasyTuning_V1_0.slr
Additional Information
When you open a project file, a dialog box may appear to confirm whether to overwrite
the project with current project library data. In principle, click the Yes Button to
overwrite the project with the project library data.
7-3-2 Copying Data Types
In the NJ/NX project in the sample project file, some data types are defined for the global
variables required to interface with the NA. Copy all the information to the user project.
7-3-3 Copying Global Variables
In the NJ/NX project in the sample project file, the global variables required to interface with
the NA are declared. Copy all the information to the user project.
7-3-4 Copying POUs
In the NJ/NX project in the sample project file, the following program and function block are
defined. Copy them to the user project.
 Program
Program0/Section0
 Function block
FB_1SEasyTuningReadServoInfo

Omron 1S Series Specifications

General

Brand	Omron
Model	1S Series
Category	Servo Drives
Language	English