2 Precautions
(1) When building an actual system, check the specifications of the component devices of the
system, use within the ratings and specified performance, and implement safety measures
such as safety circuits to minimize the possibility of an accident.
(2) For safe use of the system, obtain the manuals of the component devices of the system and
check the information in each manual, including safety precautions, precautions for safe use.
(3) It is the responsibility of the customer to check all laws, regulations, and standards that the
system must comply with.
(4) All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying,
recording, or otherwise, without the prior written permission of OMRON.
(5) The information in this guide is current as of September 2019.
No patent liability is assumed with respect to the use of the information contained herein.
Moreover, because OMRON is constantly striving to improve its high-quality products, the
information contained in this guide is subject to change without notice.
(6) The operation of each design template has been tested using the system configuration
indicated in sections 4 and 5-2 of this guide. The display operation after incorporating the
templates is not guaranteed.
Special information in this document is classified as follows:
Precautions for Safe Use
Indicates precautions on what to do and what not to do to ensure safe usage of the
product.
Precautions for Correct Use
Indicates precautions on what to do and what not to do to ensure proper operation and
performance.
Additional Information
Additional information to read as required.
This information is provided to increase understanding or make operation easier.
Copyrights and Trademarks
Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in
Japan and other countries for OMRON factory automation products.
Microsoft product screen shots reprinted with permission from Microsoft Corporation.
Windows is a registered trademark of Microsoft Corporation in the USA and other
countries.
EtherCAT
®
is a registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
Company names and product names in this document are the trademarks or registered
trademarks of their respective companies.
To Next Page
Loading...
Need help?
General
