Omron E4C-UDA User Manual

- 6 -
5. Bank selection
A
B
Normal display
D123
E21P
Reversed display
0 to 3
6. Bank registration
7. Display orientation
0 to 3
Scaling set
ON
OFF
Scaling not set
9. Scaling
E4C-DS30
30
8. Sensor model selection
E4C-DS80
80
E4C-DS100
100
Output on each channel
2OUT
10. Output method setting
* In the case of the twin output model
AREA
2BIT output
2BIT
This is output only when there is a workpiece
between two threshold value distances.
Range of two preSET points is
output as 1 to 5 V.
2PNT
10. Output area setting
* In the case of the analog output model
RFCT
Range of two points preset by
direct entry is output as 1 to 5 V.
MFCS
Near-distance side rated distance to back-
ground setting range is output as 1 to 5 V.
1636705-7A_e4c-uda_E.fm 6 ページ ２００５年１１月１５日 火曜日 午後４時５８分

Omron E4C-UDA Specifications

General

Brand	Omron
Model	E4C-UDA
Category	Amplifier
Language	English