Omron IntelliSense IW2 User Manual

Correct Usage
How to Apply the Wrist Cuff
1. Roll up your sleeve so that the monitor is in direct
contact with skin. Do not apply over clothing.
Make sure that your sleeve is not too tight and
does not constrict the flow of blood in your arm.
2. Place the wrist cuff over your left wrist with your left thumb facing upward.
3. Hold the bottom part of the wrist cuff and wrap it around the wrist while
pulling so that it fits comfortably.
Make sure that the wrist cuff does not cover the protruding part of the
wrist bone (ulna) on the outside of the wrist.
Unless the wrist cuff is wrapped securely around the wrist, it may not be
possible to take correct measurements.
4. The remaining part of the wrist cuff can be
conveniently folded back out of the way.
Taking measurements on the right wrist
Measurements can also be made on the right wrist.
Fit the monitor on the right wrist as shown.
M
E
M
S
E
T
S
T
A
R
T
S
T
O
P
M
E
M
S
E
T
S
T
A
R
T
S
T
O
P
10
How to Apply the Wrist Cuff
M
E
M
S
E
T
S
T
A
R
T
S
T
O
P
M
E
M
SET
START
STOP
EN[IW2]-2 3/14/05 5:22 PM Page 10

Omron IntelliSense IW2 Specifications

Display

display type	LCD Digital Display

Measurement

measurement method	Oscillometric method
measurement range pressure	0 to 299 mmHg
pulse range	40 to 180 beats/min

Accuracy

pressure accuracy	Within ±3 mmHg
pulse rate accuracy	Within ±5% of reading

Power Supply and Battery

power supply	Two AAA batteries (LR03)
battery life	Approximately 300 measurements

Operating Environment

operating temperature	10°C to 40°C
operating humidity	30 to 85% RH

Storage Conditions

storage temperature	-20°C to 60°C
storage humidity	10 to 95% RH

Weight and Dimensions

weight	Approximately 110 g
width	70 mm
height	54 mm
depth	37 mm