Omron IntelliSense IW2 User Manual

Correct Usage
How to Use the Memory Function
This monitor has a memory capable of storing 90 sets of readings. Every time
you complete the measurement, the monitor automatically stores blood
pressure and pulse rate. The monitor also displays an average reading based
on the measurements from the three most recent readings.
Notes:
* To ensure that the measurement results are recorded correctly, make sure
that the date and time are set correctly before taking a measurement.
* When 90 sets of readings are stored in memory, the oldest set will be
deleted to store a new set.
* The date and time of stored readings will be alternately displayed.
To View the Average Value
Press the MEM button.
To View Previous Readings Stored in Memory
1. Press the MEM button, while the average reading is displayed, to view
readings stored in memory from the most recent to the oldest.
14
How to Use the Memory Function
EN[IW2]-2 3/14/05 5:22 PM Page 14

Omron IntelliSense IW2 Specifications

Display

display type	LCD Digital Display

Measurement

measurement method	Oscillometric method
measurement range pressure	0 to 299 mmHg
pulse range	40 to 180 beats/min

Accuracy

pressure accuracy	Within ±3 mmHg
pulse rate accuracy	Within ±5% of reading

Power Supply and Battery

power supply	Two AAA batteries (LR03)
battery life	Approximately 300 measurements

Operating Environment

operating temperature	10°C to 40°C
operating humidity	30 to 85% RH

Storage Conditions

storage temperature	-20°C to 60°C
storage humidity	10 to 95% RH

Weight and Dimensions

weight	Approximately 110 g
width	70 mm
height	54 mm
depth	37 mm