Omron IntelliSense IW2 User Manual

Correct Usage
How to Take a Reading
1. Sit comfortably, hold your arm across your chest
and relax.
2. Press the START/STOP button.
3. Hold your arm across your chest so that your fingers are touching the
opposite shoulder.
Adjust the height of your wrist until the position sensor alarm beeps slowly.
When the monitor senses that your arm is in the correct position, the wrist
cuff will automatically start to inflate and measurement starts.
Notes:
* If your wrist is too low or too high, the position sensor alarm will emit a
series of two short bleeps similar to a heartbeat.
* Sit still and do not talk or move until the measurement is completed.
* Keep the monitor at heart height until the measurement is completed.
* To stop measurement, press the START/STOP button at any time during
measurement.
11
How to Take a Reading
Blip Blip
Beep Beep
Blip Blip
EN[IW2]-2 3/14/05 5:22 PM Page 11

Omron IntelliSense IW2 Specifications

Display

display type	LCD Digital Display

Measurement

measurement method	Oscillometric method
measurement range pressure	0 to 299 mmHg
pulse range	40 to 180 beats/min

Accuracy

pressure accuracy	Within ±3 mmHg
pulse rate accuracy	Within ±5% of reading

Power Supply and Battery

power supply	Two AAA batteries (LR03)
battery life	Approximately 300 measurements

Operating Environment

operating temperature	10°C to 40°C
operating humidity	30 to 85% RH

Storage Conditions

storage temperature	-20°C to 60°C
storage humidity	10 to 95% RH

Weight and Dimensions

weight	Approximately 110 g
width	70 mm
height	54 mm
depth	37 mm