Omron IntelliSense IW2 User Manual

Troubleshooting
Symptom
18
Cause Correction
No display appears
when the START/STOP
button is pressed.
Batteries are flat.
Replace with new
batteries.
Batteries were inserted
incorrectly.
Insert the batteries with
the correct [+] [-]
polarity.
Cannot measure or
readings are too high.
Are you holding the
wrist cuff at heart level?
Measure while in the
correct posture.
Is the cuff wrapped
snugly around the wrist?
Wrap the cuff correctly.
Are your arms and
shoulders tense?
Relax and try taking the
measurement again.
Have you been talking
or moving your hands
during measurement?
Keep still and do not talk
during measurement.
The blood pressure is
different each time. The
reading is extremely
low (or high).
Blood pressure readings constantly vary with time
of measurement and psychological condition. Take
deep breaths to relax before taking a
measurement.
EN[IW2]-2 3/14/05 5:22 PM Page 18

Omron IntelliSense IW2 Specifications

Display

display type	LCD Digital Display

Measurement

measurement method	Oscillometric method
measurement range pressure	0 to 299 mmHg
pulse range	40 to 180 beats/min

Accuracy

pressure accuracy	Within ±3 mmHg
pulse rate accuracy	Within ±5% of reading

Power Supply and Battery

power supply	Two AAA batteries (LR03)
battery life	Approximately 300 measurements

Operating Environment

operating temperature	10°C to 40°C
operating humidity	30 to 85% RH

Storage Conditions

storage temperature	-20°C to 60°C
storage humidity	10 to 95% RH

Weight and Dimensions

weight	Approximately 110 g
width	70 mm
height	54 mm
depth	37 mm