Omron IntelliSense IW2 User Manual

Initial Set-Up
Battery Life & Replacement
• High performance alkaline dry cell batteries (2 “ AAA”) should be good for
approximately 300 readings.
• Battery life varies with ambient temperature, battery life is shorter under cold
conditions such as during the winter.
• The dry cell batteries provided are for monitoring and may run down before
300 readings.
• If the battery low symbol blinks while measuring or if pressure is not applied
when the START/STOP button is pressed, replace both batteries (use the
same type).
• Holding the START/STOP button down may shorten battery life. To avoid
pressure on the button when transporting or storing, use the case provided.
• Dispose of batteries according to applicable local regulations.
7
Battery Installation/Replacement
EN[IW2]-2 3/14/05 5:22 PM Page 7

Omron IntelliSense IW2 Specifications

Display

display type	LCD Digital Display

Measurement

measurement method	Oscillometric method
measurement range pressure	0 to 299 mmHg
pulse range	40 to 180 beats/min

Accuracy

pressure accuracy	Within ±3 mmHg
pulse rate accuracy	Within ±5% of reading

Power Supply and Battery

power supply	Two AAA batteries (LR03)
battery life	Approximately 300 measurements

Operating Environment

operating temperature	10°C to 40°C
operating humidity	30 to 85% RH

Storage Conditions

storage temperature	-20°C to 60°C
storage humidity	10 to 95% RH

Weight and Dimensions

weight	Approximately 110 g
width	70 mm
height	54 mm
depth	37 mm