Omron NJ Series Troubleshooting Manual

Relevant Manuals
2
NJ-series Troubleshooting Manual (W503)
Relevant Manuals
There are three manuals that provide basic information on the NJ-series CPU Units: the NJ-series CPU
Unit Hardware User’s Manual, the NJ-series CPU Unit Software User’s Manual, and the NJ-series
Instructions Reference Manual.
Most operations are performed from the Sysmac Studio Automation Software. Refer to the Sysmac Stu-
dio Version 1 Operation Manual (Cat. No. W504) for information on the Sysmac Studio.
Other manuals are necessary for specific system configurations and applications.
Read all of the manuals that are relevant to your system configuration and application to make the most
of the NJ-series CPU Unit.
Purpose of use
Manual
NJ Series NX Series
Basic informa-
tion
NJ-series CPU Unit Hardware User’s Manual NJ-series CPU Unit Software User’s Manual NJ-series Instructions Reference Manual NJ-series CPU Unit Motion Control User’s Manual NJ-series CPU Unit Built-in EtherCAT Port User’s Manual NJ-series Motion Control Instructions Reference Manual NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual NJ-series Database Connection CPU Unit User’s Manual NJ-series Troubleshooting Manual NX-series EtherCAT Coupler Unit User’s Manual NX-series NX Units User’s Manuals NX-series Safety Control Unit User’s Manual NX-series Safety Control Unit Instructions Reference Manual NX-series Data Reference Manual CJ-series Special Unit Operation Manuals for NJ-series CPU Unit
Introduction to NJ-series Controllers ●
Setting devices and hardware
●
Using motion control ●●
Using EtherCAT ●
Using EtherNet/IP ●
Using the database connection
service
●
Using the NX Series ●● ●
Performing safety controls ●●
Using CJ-series Units ●
Software settings
●
Using motion control ●●
Using EtherCAT ●
Using EtherNet/IP ●
Using the database connection
service
●
Using the NX Series ●● ●
Performing safety controls ●●●
Writing the user program
●●
Using motion control ●● ●
Using EtherCAT ●
Using the database connection
service
●
Using the NX Series ●●
Performing safety controls ●●
Using CJ-series Units ●
Programming error processing ●

Omron NJ Series Specifications

General

Brand	Omron
Model	NJ Series
Category	Controller
Language	English