Omron NX-SL series User Manual

2 Standard Functions
2 - 14
NX-series Safety Control Unit Instructions Reference Manual (Z931)
BOOL_TO_TIME
This function converts a BOOL variable to a TIME variable.
If you omit an input or output parameter, a building error will occur.
This function converts BOOL data In to TIME data Out.
If the value of In is FALSE, the value of Out is 0 ms (T#0ms).
If the value of In is TRUE, the value of Out is 1 ms (T#1ms).
To check for TIME data, refer to TIME_TO_BOOL.
• The input condition depends on whether the output is safety data or standard data. If the condition is
not met, a building error will occur.
• If you set a safety data type variable for the output terminal, set a safety data type variable for the
input terminal as well.
• If you set a standard data type variable for the output terminal, you can set either a safety data type
variable or a standard data type variable for the input terminal.
Instruction Name FB/FUN Graphic expression
BOOL_TO_TIME Convert BOOL to
TIME
FUN
Variables
Name I/O Description Valid range Default
In Data to con-
vert
Input Data to con-
vert
TRUE or FALSE FALSE
Out Conversion
result
Output Duration T#0ms or T#1ms T#0ms
Boolean Bit strings Integers Durations
BOOL SAFEBOOL BYTE SAFEBYTE WORD SAFEWORD DWORD SAFEDWORD INT SAFEINT DINT SAFEDINT TIME SAFETIME
In OK OK
Out OK OK
Function
Additional Information
Precautions for Correct Use
BOOL_TO_TIME

Omron NX-SL series Specifications

General

Brand	Omron
Model	NX-SL series
Category	Control Unit
Language	English