Omron R88D-1SN ECT Series Startup Guide

31
An axes group is added to the Multiview Explorer.
The new axes group is displayed as MC_Group000.
Right-click the group that you added in the Multiview Explorer and select Edit from the
menu.
The axes group settings are displayed on the Axes Group Basic Settings Display in the
Edit Pane.
Set the Axes Group Basic Settings for axes group 0 as shown in the following figure.
This concludes the axes group settings.

Omron R88D-1SN ECT Series Specifications

General

Brand	Omron
Model	R88D-1SN ECT Series
Category	Controller
Language	English