Omron R88D-1SN ECT Series Startup Guide

33
Transfer to the CPU Unit
1.
Click the Connect Button on the Toolbar
2.
Click the Transfer to Controller Button on the Toolbar
3.
Click the Execute Button to transfer the project from the computer to the CPU unit
Click the Yes Button
The operating mode changes to PROGRAM mode, and the Sysmac Studio starts
transferring the project to the CPU Unit. During the transfer, a progress bar appears in the
Synchronize Pane.
After download completion, Click The Yes Button to switch to RUN mode.
The transfer is completed, Click the Ok Button

Omron R88D-1SN ECT Series Specifications

General

Brand	Omron
Model	R88D-1SN ECT Series
Category	Controller
Language	English