1 - 31
1 Features and System Configuration
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
1-5 Applicable Standards
1
1-5-3 Korean Radio Regulations (KC)
• The Servo Drives with its capacity 5.5 kW or more
Use the UL-listed breaker or UL class fuse (RK5, CC, CF, G, J, R or T) which has the rated current
in the table.
• Observe the following precaution if you use this product in Korea.
Guide for Users
This equipment has been evaluated for conformity in a commercial environment.
When used in a residential environment, it may cause radio interference.
• The 1S-series Servo Drives comply with the Korean Radio Regulations (KC).
• The 1S-series Servomotors are exempt from the Korean Radio Regulations (KC).
• The main power supply inputs can conform to the SEMI F47 standard for momentary power interrup-
tions (voltage sag immunity) for no-load operation.
• This standard applies to semiconductor manufacturing equipment.
Precautions for Correct Use
• This standard does not apply to the 24-VDC control power input. Use the power supply.
• This standard does not apply to single-phase 100-V Servo Drives.
• Be sure to perform evaluation tests for SEMI F47 compliance in the entire machine and system.
R88D-1SN01H-ECT UL CLASS RK5 15 A
R88D-1SN02H-ECT UL CLASS RK5 15 A
R88D-1SN04H-ECT UL CLASS RK5 15 A
R88D-1SN08H-ECT UL CLASS RK5 15 A
R88D-1SN10H-ECT UL CLASS RK5 15 A
R88D-1SN15H-ECT UL CLASS RK5 40 A
R88D-1SN20H-ECT UL CLASS RK5 40 A
R88D-1SN30H-ECT UL CLASS RK5 40 A
R88D-1SN06F-ECT UL CLASS RK5 20 A
R88D-1SN10F-ECT UL CLASS RK5 20 A
R88D-1SN15F-ECT UL CLASS RK5 20 A
R88D-1SN20F-ECT UL CLASS RK5 20 A
R88D-1SN30F-ECT UL CLASS RK5 20 A
Servo Drive model Voltage (Minimum) Ampere
R88D-1SN55H-ECT 240 V 60 A
R88D-1SN75H-ECT 240 V 60 A
R88D-1SN150H-ECT 240 V 125 A
R88D-1SN55F-ECT 480 V 30 A
R88D-1SN75F-ECT 480 V 30 A
R88D-1SN150F-ECT 480 V 60 A
1-5-3 Korean Radio Regulations (KC)
1-5-4 SEMI F47
Servo Drive model Fuse
To Next Page
Loading...
Need help?
General
