2-1SectionCPU Rack
10
2-1 CPU Rack
The
following figure shows the names of all the parts of a CPU Rack. There are
four
models of Backplanes available with 3, 5, 8 and 10 slots for I/O Units. Y
ou
can
use any of these Backplanes to build a CPU or Expansion I/O Rack.
Howev
-
er,
the C200H-OC225/OD212/OD21A 16-point Output
Unit and C200H-B7AO1
B7A Interface Unit must be mounted to a C200H-BCjj1-V1/V2 Backplane.
Backplane
mounting
screws (four, with
4-mm dia. heads)
CPU
I/O Units
I/O Connecting Cable connector
Connects CPU Rack to Expansion I/O Rack
When not used, cover with a cap.
This connector not used:
Cover with a cap.
Backplane
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
Need help?
General
