17
En
Connections
Connections
Note
• Push plugs in all the way to make good connections (loose connections can cause noise or malfunctions).
• To prevent interference, keep audio cables away from power cords and speaker cables.
• The compact disc player’s optical digital jack has a shutter-type cover that opens when an optical plug is inserted and closes when it’s removed. Push plugs in all the way.
• To prevent shutter damage, hold the optical plug straight when inserting and removing.
• The analog audio cable can be used instead of the coaxial cable.
Plugging the AES/EBU cable
Match the pins and insert the jack until you hear a “click.” Make sure that the jack is locked
by lightly pulling the connection cable.
Unplugging the AES/EBU cable
Pull out the connection cable while holding down the button.
Cable and Jacks
Balanced AES/EBU This is a professional digital audio interface. Balanced AES/EBU cables are used for better noise immunity and longer cable runs. The maximum
sampling rate for PCM output is 44.1 kHz/16 bit, 2ch.
Optical digital audio Optical digital connections allow you to enjoy digital sound. The maximum sampling rate for PCM input is 44.1 kHz/16 bit, 2ch.
Coaxial digital audio Coaxial digital connections allow you to enjoy digital sound. The maximum sampling rate for PCM input is 44.1 kHz/16 bit, 2ch.
Analog audio (RCA) Analog audio connections (RCA) carry analog audio.
About Balanced Output (AES/EBU Jack)
OPTICAL
Orange
L
R
White
Red
Right!
Wrong!
12
To Next Page
Loading...
Need help?
General
Weight and Dimensions
