22
En
(Audio CD Display)
(MP3/WMA Display)
File name will be displayed by scrolling.
Tip
• Only alphanumeric characters in MP3/WMA CD information
are displayed correctly. Double-byte characters and other
characters appear as underscores.
• If a disc has been set in the tray, when the power of the compact
disc player is turned on, then it starts to play automatically.
■ To Select Tracks
Press 6 to select the next track/file or 7 to select
the previous track/file.
• If you press 7 during playback or while
playback is paused, the beginning of the current
track/file is selected.
• If you select a track/file while playback is stopped,
press 1 to start playback.
• When 7/6 are pressed, the following Disc
information is displayed for MP3/WMA.
(During playback) File number/File name → File
name → File number/playing time
(Paused) File number/File name → File name →
Folder number/File number
■ To Fast-Forward or Fast-Reverse
During playback or while playback is paused, hold
down 4 to fast-forward or 5 to fast-reverse.
■ To Pause Playback
During playback, press 3. The 3 indicator lights.
To resume playback, press 1 or 3 again.
■ To Stop Playback
Press 2 to stop playback.
■ To Eject the Disc
Press 0 to open the disc tray.
Note
• For MP3/WMA CDs, you can select MP3/WMA files in other
folders.
Playing the Disc
1
Press 0 to open the disc tray.
Pressing 0 while the compact disc player is on
Standby will turn on the compact disc player and open
the disc tray.
03
76
21
0
3
,
7
,
1
,
6
,
5
,
2
,
4
2
Place the disc on the tray with the label-side facing
up.
When you want to listening to the 8 cm disc, place it
in the center of the tray.
3
Press 1 to start playback.
The disc tray closes and playback starts.
Track currently
playing
Elapsed track
time
1 indicator
3 indicator