44
First Time Setup—Continued
If you connect an u-capable Onkyo RI Dock to the
TV/TAPE IN, GAME IN or VCR/DVR IN jacks, for u
to work properly, you must change this setting.
This setting can only be changed on the AV receiver.
Notes:
• DOCK can be selected for the TV/TAPE or GAME or
VCR/DVR input selector, but not at the same time.
• Enter the appropriate remote control code before
using the AV receiver’s remote controller for the first
time (see page 88).
Changing the Input Display
1
Press the [TV/TAPE], [GAME] or
[VCR/DVR] input selector button
so that “TV/TAPE”, “GAME” or
“VCR/DVR” appears on the dis-
play.
2
Press and hold down the [TV/
TAPE], [GAME] or [VCR/DVR]
input selector button (about 3
seconds) to change the setting.
Repeat this step to select DOCK.
For the TV/TAPE input selector, the
setting changes in this order:
For the GAME input selector, the
setting changes in this order:
GAME
↔ DOCK
For the VCR/DVR input selector, the
setting changes in this order:
VCR/DVR
↔ DOCK
GAME TV/TAPE
VCR/DVR
oror
or
oror
or
TV/TAPE → MD → CDR
DOCK
→
→
To Next Page
Loading...
Need help?
General
