Enjoying HomeTheater
You can use two sets
of
speakers with the
AV
receiver: speaker setA and speaker set B.
Speaker
setA
should
be
used in your main listening room for up to 5.l-channel playback.
*While speaker set B is on, speaker setA is reduced to 2. I-channel playback.
Speaker
set
B can
be
used in another room and offers 2-channel stereo playback.
AV
receiver
Remote
controller
~
Speaker
set
A
Speaker
set
B
Indicator
Output
On
0000
Set
A:
2.1 channels
On
Set
B:
2 channels
Off
•.
00
Set
A:
5.1 channels
<
..
c·
.".
On
00
Set
B:
2 channels
Off
'"
":'.
""oJ
Off
No sound
".------------------
Speaker Set A: Main Room
20
Center
speaker
(SKC-360C)
---------,
This speaker enhances the front left and right speakers,
making sound movements distinct and providing a full
sound image. For movies it's used mainly for dialog.
Position it close to your
TV
facing forward at about ear
level, or at the same height as the front left and right
speakers.
~
-'31.,
.;:;""-
. ? _
"_
'">
•
·wn;Ie.speakersetB
is.on,
thiS
speakijri>utput5
no
50000.'
",...
'~:1~:
. "
Subwoofer
(SKW-360)
---------.,
The subwoofer handles the bass sounds
of the LFE (Low-Frequency Effects)
channel. In general, a good bass sound
can be obtained by installing the sub-
woofer in a front corner, or at one-third
the way along the wall, as shown.
Corner
position
1/3 of wall
position
Speaker Set B: Sub Room
Front
left
and
right
speakers
(SKF-360F
UR)
These output the overall sound. Their
role in a home theater is to provide a
solid anchor for the sound image. They
should be positioned facing the listener
at about ear level, and equally spaced
from the
TV.
Angle them inward.
HTP-360
speaker
package
is
shown
Surround
left
and
right
speakers
(SKM-360S UR)
These speakers are used for precise sound position-
ing and to add realistic ambience. Position them at the
sides of the listener, or slightly behind, about
2-3
feet
(60-100 em) above ear level. Ideally they should be
equally spaced from the listener.
• While speaker set
Bis
on, these speakers output no
sound.