Onkyo HT-S3100 User Manual

Connecting Your Components-Continued
Step 1: Make sure that each Onkyo component is connected to the AV receiver with an analog audio cable.
Step 2: Make the R I connection.
Step 3: If you're using an MD, CDR, or HDD component, change the Input Display (see page 38).
With RI (Remote Interactive), you can use the following special functions:
• Auto Power On/Standby
When you start playback on a component connected via R I , if the AV receiver is on Standby, it will automatically
tum on and select that component as the input source. Similarly, when the AV receiver is set to Standby, all compo-
nents connected via R I will also go on Standby.
• Direct Change
When playback is started on a component connected via RI, the AV receiver automatically selects that component
as the input source. If your DVD player is connected to the AV receiver's multichannel DVD input, you'll need to
press the [MULTI CH] button to hear all channels (see page 40), as the Direct Change R I function only selects the
FRONT DVD INjacks.
• Remote Control
You can use the AV receiver's remote controller to control your other R I -capable Onkyo components, pointing the
remote controller at the AV receiver's remote control sensor instead of the component.
Notes:
• Use only RI cables for RI connections. RI
cables are supplied with Onkyo players (DVD,
CD, etc.).
• Some components have two R I jacks. You can
connect either one to the AV receiver. The other
jack is for connecting additional R I -capable
components.
• Connect only Onkyo components to R I jacks.
Connecting other manufacturer's components
may cause a malfunction.
• Some components may not support all R I func-
tions. Refer to the manuals supplied with your
other Onkyo components.
36
Notes:
• Before connecting the power cord, connect all of your speakers and AV components.
• Connect the AV receiver's power cord to a suitable wall outlet.
• Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical
equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit.

Onkyo HT-S3100 Specifications

General

Brand	Onkyo
Model	HT-S3100
Category	Home Theater System
Language	English