Onkyo LS3100 User Manual

12
En
Front speaker can be placed on the table top or
mounted to the wall by using supplied stands.
■ Using the rubber stoppers for a more
stable platform
We recommend to use the supplied rubber
stoppers to achieve the best possible sound.
Attach the rubber stoppers to the four corners
of the bottom. The rubber stopper also provides
stability.
(Placing on the floor, etc.)
(Using the stand)
■ Attaching the stand
Insert the stand into the stand slit on the rear of
the front speaker.
(Table top)
(Wall Mounting)
Tip
• The front speaker can be mounted/placed both
horizontally and vertically.
■ Adjusting the angle
The angle of the speaker can be adjusted in two
ways depending on which stand slit you use.
Mounting/Placing the Front
Speakers
Thick rubber stoppers
Bottom of the SLM-301
Thin rubber stoppers
Bottom of the supplied stand
(Using the upper slit) (Using the lower slit)
Slit for stand

Onkyo LS3100 Specifications

General

Product color	Black
RMS rated power	- W
Recommended usage	Home theatre
Remotely operated	Yes
Audio output channels	2.1 channels
Amplifier frequency range	50 - 20000 Hz
Signal-to-Noise Ratio (SNR)	93 dB
Total Harmonic Distortion (THD)	0.8 %
Amplifier dimensions (W x D x H)	187 x 120 x 32 mm
Satellite speaker type	2-way
Satellite speaker weight	700 g
Number of satellite speakers	2
Satellite speakers RMS power	40 W
Satellite speaker frequency range	200 - 20000 Hz
Satellite speaker dimensions (WxDxH)	169 x 108 x 78 mm
Subwoofer type	Active subwoofer
Subwoofer weight	5800 g
Subwoofer frequency range	40 - 200000 Hz
Subwoofer drivers quantity	1
Subwoofer dimensions (WxDxH)	261 x 269 x 337 mm
Subwoofer driver diameter (imperial)	6.3 \
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Bluetooth version	2.1+EDR

Weight and Dimensions

Set weight	10500 g