14
En
Connections
Connections
Connect the supplied front speaker. Connect
positive (+) terminal of the front speaker to
positive (+) terminal of the controller
(LAP-301) and negative (-) terminal of the
front speaker to negative (-) terminal of the
controller.
Tip
• The two speakers are identical, so it doesn’t matter
which one you use on the left or right.
Speaker Connection Precautions
Read the following before connecting your
speakers:
• You can connect speakers with an impedance
of between 4 and 8 ohms.
• Disconnect the power cord from the wall
outlet before making any connections.
• Pay close attention to speaker wiring polarity.
In other words, connect positive (+) terminals
only to positive (+) terminals, and negative
(-) terminals only to negative (-) terminals. If
you get them the wrong way around, the
sound will be out of phase and will sound
unnatural.
• Be careful not to short the positive and
negative wires. Doing so may damage the
controller.
• Make sure the metal core of the wire does not
have contact with the controller’s rear panel.
Doing so may damage the controller.
• Don’t connect more than one cable to each
speaker terminal. Doing so may damage the
controller.
• Don’t connect one speaker to several
terminals.
Connecting the Front Speakers
Front right
speaker
Supplied speaker cable
Front left
speaker
To Next Page
Loading...
Need help?
General
Weight and Dimensions
