Onkyo LS3100 User Manual

16
En
Note
• Before connecting the power cord, connect all of
your speakers and TV.
• Turning on the unit may cause a momentary power
surge that might interfere with other electrical
equipment on the same circuit. If this is a problem,
plug the unit into a different branch circuit.
• Do not use the power cord other than the one
supplied with the unit. The supplied power cord is
designed exclusively for use with the unit and
should not be used with any other equipment.
• Never disconnect the power cord from the unit
while the other end is still plugged into a wall outlet.
Doing so may cause an electric shock. Always
disconnect the power cord from the wall outlet first,
and then the unit.
Connecting the Power cord
(LAP-301)
1
Connect the supplied AC adapter and
the power cord.
2
Insert the plug of the AC adapter into
DC IN.
3
Plug the AC adapter into an AC wall
outlet.
(SLW-301)
1
Connect the supplied power cord for
subwoofer to AC INLET.
Note
• The shape of the AC INLET differs depending
on the country.
2
Plug the power cord into an AC wall
outlet.
1
2
3
To AC wall outlet
2
1
To AC wall outlet

Onkyo LS3100 Specifications

General

Product color	Black
RMS rated power	- W
Recommended usage	Home theatre
Remotely operated	Yes
Audio output channels	2.1 channels
Amplifier frequency range	50 - 20000 Hz
Signal-to-Noise Ratio (SNR)	93 dB
Total Harmonic Distortion (THD)	0.8 %
Amplifier dimensions (W x D x H)	187 x 120 x 32 mm
Satellite speaker type	2-way
Satellite speaker weight	700 g
Number of satellite speakers	2
Satellite speakers RMS power	40 W
Satellite speaker frequency range	200 - 20000 Hz
Satellite speaker dimensions (WxDxH)	169 x 108 x 78 mm
Subwoofer type	Active subwoofer
Subwoofer weight	5800 g
Subwoofer frequency range	40 - 200000 Hz
Subwoofer drivers quantity	1
Subwoofer dimensions (WxDxH)	261 x 269 x 337 mm
Subwoofer driver diameter (imperial)	6.3 \
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Bluetooth version	2.1+EDR

Weight and Dimensions

Set weight	10500 g